The Saberz Store
The Saberz Store
The Module is the core of every Saberz.com hilt. ALL of the hilt electronics are contained within the Module, so that when swapping out Emitters and Pommels, there's no need to worry about wires or stray parts. That's the beauty of the Z-Core System - you can create any Saberz hilt you like with just a single Module. Just swap out the other parts, and you can change your Apollyon into an Oracle in less than a minute!
We sell three versions of our Modules:
- Prizm Module: This is our top-of-the line Module, which comes pre-installed with the amazing Prizm board. With a Prizm Module, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Modules can become different Saberz, but only our Prizm Modules give you a whole world of color. Moreover, Prizm features premium 16-bit sound, driven by a specially-commissioned mini speaker that sounds amazing. The Modules come complete with three soundfonts pre-installed, and a wide range of color profiles. Modifying or replacing the default colors can be done by editing the "override.txt" file at the root of the MicroSD card. The card is easily accessible by hand - no tiny tweezers or special tools required. Just remove the pommel from your Module and push down on the MicroSD card to eject it from its spring-loaded holder.
- Spectrum Module: For those of you who love what the Z-Core System represents, but don't have the budget for a full-on Prizm build will love our Spectrum-equipped Modules. These Modules are built with direct-drive LEDs, running off of a 2600mAh Lithium-Ion rechargeable battery. They also feature the same recharge port featured on our Prizm Saberz, so that you never have to open up the saber to charge it! Just plug in to one of our wall chargers, and you're good to go! Stunt Modules do not have sound.
- Empty Module: Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an Empty Module might be your best choice. We sell our Modules with everything you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, all the fasteners necessary to complete your Module, AND the appropriate switches to fit into the switchplate. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs, or a single-switch version with a single 16mm latching switch. Both versions come with a 2.1mm recharge port, compatible with our wall chargers.