Welcome to Saberz.com

The Saberz Store
The Saberz Store

By purchasing a product from Saberz.com, you agree to our store policies


Apollyon




















  • Apollyon
    (Empty Hilt)


    Button Options:


    $184.99
    Out of stock
  • Apollyon
    w/Spectrum


    $284.99
    Out of stock
  • Apollyon
    w/Prizm


    Button Options:


    $534.99
    Out of stock

Apollyon: the design that started it all

Apollyon was our first design, and became the saber that inspired the entire Z-Core System. From Pommel to Emitter, the entire saber has been designed to provide superlative ergonomics, making it the perfect dueling saber. A smooth, unadorned Module section ensures a comfortable, secure grip no matter where you grab the saber. An extra-long, thin neck provides an ample choke section for performing twirls and complex saber motions. The flared emitter acts as a tsuba, or hand guard, to prevent the saber from moving when you are really going for it! The emitter features a custom, triangularly-symmetrical relief, with black-anodized accents. And the classic sink-knob pommel finishes the piece in style, complete with a custom relief of its own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Oracle Light




















  • Oracle Light
    (Empty Hilt)


    Button Options:


    $241.99
    Out of stock
  • Oracle Light
    w/Spectrum


    $341.99
    Out of stock
  • Oracle Light
    w/Prizm


    Button Options:


    $592.99
    Out of stock

Oracle: Half elegance, half function. 100% Awesome

Oracle is perhaps the most-anticipated design in the Saberz lineup. And it's easy to see why: the design is as intricate as it is beautiful. We start at the emitter: from its beautiful S-Curve emitter tip, going immediately back into grooved radial grips with window cutouts to the saber body below, Oracle's emitter is completely distinctive, yet also familiar and timeless. Going back, its unique two-piece body shroud is like nothing else in the saber world, providing a beautiful style that adds aesthetic beauty without compromising on the functionality of a smooth design that doesn't hinder the hand while dueling. Finally, the understated, deceptively-simple pommel features the Saberz.com signature relief on the rear face, adding a touch of unique beauty while adding a functional sound vent.

Oracle is available in three different versions, each with a different combination of part colors. You can also customize your Oracle with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Oracle Dark




















  • Oracle Dark
    (Empty Hilt)


    Button Options:


    $241.99
    Out of stock
  • Oracle Dark
    w/Spectrum


    $341.99
    Out of stock
  • Oracle Dark
    w/Prizm


    Button Options:


    $592.99
    Out of stock

Oracle: Half elegance, half function. 100% Awesome

Oracle is perhaps the most-anticipated design in the Saberz lineup. And it's easy to see why: the design is as intricate as it is beautiful. We start at the emitter: from its beautiful S-Curve emitter tip, going immediately back into grooved radial grips with window cutouts to the saber body below, Oracle's emitter is completely distinctive, yet also familiar and timeless. Going back, its unique two-piece body shroud is like nothing else in the saber world, providing a beautiful style that adds aesthetic beauty without compromising on the functionality of a smooth design that doesn't hinder the hand while dueling. Finally, the understated, deceptively-simple pommel features the Saberz.com signature relief on the rear face, adding a touch of unique beauty while adding a functional sound vent.

Oracle is available in three different versions, each with a different combination of part colors. You can also customize your Oracle with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Oracle Classic




















  • Oracle Classic
    (Empty Hilt)


    Button Options:


    $241.99
    Out of stock
  • Oracle Classic
    w/Spectrum


    $341.99
    Out of stock
  • Oracle Classic
    w/Prizm


    Button Options:


    $592.99
    Out of stock

Oracle: Half elegance, half function. 100% Awesome

Oracle is perhaps the most-anticipated design in the Saberz lineup. And it's easy to see why: the design is as intricate as it is beautiful. We start at the emitter: from its beautiful S-Curve emitter tip, going immediately back into grooved radial grips with window cutouts to the saber body below, Oracle's emitter is completely distinctive, yet also familiar and timeless. Going back, its unique two-piece body shroud is like nothing else in the saber world, providing a beautiful style that adds aesthetic beauty without compromising on the functionality of a smooth design that doesn't hinder the hand while dueling. Finally, the understated, deceptively-simple pommel features the Saberz.com signature relief on the rear face, adding a touch of unique beauty while adding a functional sound vent.

Oracle is available in three different versions, each with a different combination of part colors. You can also customize your Oracle with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Sentris Classic




















  • Sentris Classic
    (Empty Hilt)


    Button Options:


    $184.99
    Out of stock
  • Sentris Classic
    w/Spectrum


    $284.99
    Out of stock
  • Sentris Classic
    w/Prizm


    Button Options:


    $584.99
    Out of stock

Sentris: intricate beauty, solid design

Early in 2015 we asked our facebook followers which of five new designs should be our first release of the year. The answer, by an overwhelming majority, was Sentris. This original design is like nothing else out there; a single intricate shroud covers the entire saber from emitter to pommel, with selective cutouts to show the module beneath it. The ergonomics of the shroud complement our Saberz modules, forming a complete and cohesive unit that feels great in the hand, and makes for a better dueling saber. Creating the Sentris shroud was a challenging task; it required a dedicated extrusion mold in order to achieve the exact wall thickness and inner diameter of the shroud, and then EDM wire cuts to create the shape. It is the single most complicated part we've produced to date, but the effort was worth it for what we've achieved. Sentris uses the same Emitter and Pommel as the Oracle and Voltera Saberz, so their individual parts are interchangeable.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Sentris Gold




















  • Sentris Gold
    (Empty Hilt)


    Button Options:


    $184.99
    Out of stock
  • Sentris Gold
    w/Spectrum


    $284.99
    Out of stock
  • Sentris Gold
    w/Prizm


    Button Options:


    $584.99
    Out of stock

Sentris: intricate beauty, solid design

Early in 2015 we asked our facebook followers which of five new designs should be our first release of the year. The answer, by an overwhelming majority, was Sentris. This original design is like nothing else out there; a single intricate shroud covers the entire saber from emitter to pommel, with selective cutouts to show the module beneath it. The ergonomics of the shroud complement our Saberz modules, forming a complete and cohesive unit that feels great in the hand, and makes for a better dueling saber. Creating the Sentris shroud was a challenging task; it required a dedicated extrusion mold in order to achieve the exact wall thickness and inner diameter of the shroud, and then EDM wire cuts to create the shape. It is the single most complicated part we've produced to date, but the effort was worth it for what we've achieved. Sentris uses the same Emitter and Pommel as the Oracle and Voltera Saberz, so their individual parts are interchangeable.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Kapulus (Dark)




















  • Kapulus Dark
    (Empty Hilt)


    Button Options:


    $244.99
    Out of stock
  • Kapulus Dark
    w/Spectrum


    $344.99
    Out of stock
  • Kapulus Dark
    w/Prizm


    Button Options:


    $594.99
    Out of stock

Kapulus: the wait is over

Since May of 1999, saber enthusiasts everywhere have sought to perfect sabers with a Kapulus-esque design. However, there are always shortcomings with other interpretations of this design. The triple-strut emitter shroud and the distinct cubed pommel form a unique aesthetic that simply defies definition. At Saberz.com, we make all of our parts with ergomonically-small diameters, much more compact than the bloated saber designs you might see elsewhere. Our Kapulus saber has parts that perfectly match the diameter and dimensions of movie sabers, where ergonomics are a key to executing the lightning-fast fight choreography. At Saberz, we believe that ergonomics are the key to awesome saber duels, and should never play second fiddle to design. Ergonomics and design go hand-in-hand at Saberz.com, and we are proud to present Kapulus in all its glory.

Kapulus is available with either a Light or Dark Module section, and looks equally good with either one. You can also customize it with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Kapulus Light




















  • Kapulus Light
    (Empty Hilt)


    Button Options:


    $244.99
    Out of stock
  • Kapulus Light
    w/Spectrum


    $344.99
    Out of stock
  • Kapulus Light
    w/Prizm


    Button Options:


    $594.99
    Out of stock

Kapulus: the wait is over

Since May of 1999, saber enthusiasts everywhere have sought to perfect sabers with a Kapulus-esque design. However, there are always shortcomings with other interpretations of this design. The triple-strut emitter shroud and the distinct cubed pommel form a unique aesthetic that simply defies definition. At Saberz.com, we make all of our parts with ergomonically-small diameters, much more compact than the bloated saber designs you might see elsewhere. Our Kapulus saber has parts that perfectly match the diameter and dimensions of movie sabers, where ergonomics are a key to executing the lightning-fast fight choreography. At Saberz, we believe that ergonomics are the key to awesome saber duels, and should never play second fiddle to design. Ergonomics and design go hand-in-hand at Saberz.com, and we are proud to present Kapulus in all its glory.

Kapulus is available with either a Light or Dark Module section, and looks equally good with either one. You can also customize it with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Artex Light




















  • Artex Light
    (Empty Hilt)


    Button Options:


    $219.99
    Out of stock
  • Artex Light
    w/Spectrum


    $319.99
    Out of stock
  • Artex Light
    w/Prizm


    Button Options:


    $569.99
    Out of stock

Artex: the instant classic

There's something undeniably cool about a slanted emitter and those long longitudinal grips. Artex has been very intricately designed to bring out the most exciting features of those design ideas, in a way that evokes pure Saberz.com style. First of all, the slanted emitter on Artex has a unique bulged section, acting as a tsuba (hand guard), while also adding design flair with slotted cutouts all around the bulged section. The grip section near the pommel is even more interesting. Other saber makers use rubber grips, which are prone to cracking and drying out over time. Rubber grips also have to be put on the saber with adhesive, which is not a good way to keep them on the saber if you're doing intense dueling. Instead, we invested in an extrusion mold CNC machined out of tool steel (not a cheap thing to do), and made a special piece that creates all eight Artex grips at once, out of aluminum! The extrusion parts are further machined by CNC machine to create the cutouts in the grip part, allowing the Module underneath to show through. Then, the entire piece is affixed onto your Artex saber with a single M4 button-head screw, ensuring a durable connection that doesn't rely on adhesive, and an anodized aluminum part that will last a lifetime!

The Artex is available in a Dark and Light version, depending on your mood. You can also customize it with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Artex Dark




















  • All Saberz are color-changing!
  • Artex Dark
    (Empty Hilt)


    Button Options:


    $219.99
    Out of stock
  • Artex Dark
    w/Spectrum


    $319.99
    Out of stock
  • Artex Dark
    w/Prizm


    Button Options:


    $569.99
    Out of stock

Artex: the instant classic

There's something undeniably cool about a slanted emitter and those long longitudinal grips. Artex has been very intricately designed to bring out the most exciting features of those design ideas, in a way that evokes pure Saberz.com style. First of all, the slanted emitter on Artex has a unique bulged section, acting as a tsuba (hand guard), while also adding design flair with slotted cutouts all around the bulged section. The grip section near the pommel is even more interesting. Other saber makers use rubber grips, which are prone to cracking and drying out over time. Rubber grips also have to be put on the saber with adhesive, which is not a good way to keep them on the saber if you're doing intense dueling. Instead, we invested in an extrusion mold CNC machined out of tool steel (not a cheap thing to do), and made a special piece that creates all eight Artex grips at once, out of aluminum! The extrusion parts are further machined by CNC machine to create the cutouts in the grip part, allowing the Module underneath to show through. Then, the entire piece is affixed onto your Artex saber with a single M4 button-head screw, ensuring a durable connection that doesn't rely on adhesive, and an anodized aluminum part that will last a lifetime!

The Artex is available in a Dark and Light version, depending on your mood. You can also customize it with any of the other ZCS parts to make it truly your own.

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).



Voltera




















  • Voltera
    (Empty Hilt)


    Button Options:


    $224.99
    Out of stock
  • Voltera
    w/Spectrum


    $324.99
    Out of stock
  • Voltera
    w/Prizm


    Button Options:


    $574.99
    Out of stock

Voltera: Great Vengence and Furious Anger

Voltera is an undeniably sinister design. Its triple-clawed emitter just screams "bad," while its understated body design and simple pommel belie the concept of pure, unadulterated function. Like ALL of the Saberz.com hilts, Voltera is made for superior ergonomics and high-speed dueling. There is nothing to get in the way of your hands while gripping the saber. Even the emitter claws are functional: they function as a "tsuba," preventing your hand from sliding upwards from the upper body to the blade. As with many Saberz designs, the Voltera is deceptively simple, hiding its intricate details behind a beautiful exterior. Customize yours with any of the interchangeable parts from the Saberz.com Store!

Our Saberz are all customizable, and available in three different versions:

  • Prizm Saber
    » color-changing blade (10 colors) and premium 16-bit sound
    » includes Starlight Blade, Charger, Orientation Washers, Kill Key - (reg. $70!)


    This is our top-of-the line technology, featuring color-changing blades AND premium sound via the amazing Prizm sound board. With Prizm, you can specify up to TEN unique, completely custom color profiles, each with its own blade color and Flash-on-Clash color! The colors can be changed on-the-fly, with the blade still on! All our Saberz are customizable and can interchange their parts. But only our Prizm Modules give you a whole world of color AND premium sound. We commissioned a custom, premium-quality speaker in order to take advantage of the Prizm board's true 16-bit sound, while still fitting within the small-diameter Z-Core Modules! Prizm comes complete with three soundfonds pre-installed, and an entire rainbow of colors. You can change sound fonts, and modify the default color profiles easily via the removable MicroSD card. Two illuminated 12mm momentary switches control the Prizm board and allow you to switch colors on-the-fly! See this page for more info about Prizm.

  • Spectrum Saber
    » color-changing blade (6 colors), no sound
    » includes Starlight Blade, Charger, Orientation Washers - (reg. $61!)


    At Saberz.com, we believe that a "stunt" saber should never be a "boring" one. With Spectrum, we packed as much awesome technology and features as we could into a package that would be affordable for everyone. These color-changing Saberz can make SIX different blade colors, and save money by eliminating sound (including the expensive sound board and speaker). They are built with direct-drive LEDs, powered by the same high-capacity, rechargeable, Lithium-Ion batteries as our top-of-the-line Prizm Saberz. A single 16mm latching switch turns the saber on and off, while internal quick-disconnect plugs allow you to customize the color. See this page for more info about Spectrum.

  • Empty Hilt
    » no electronics, no sound

    Some customers are the DIY type; they like to build their hilts themselves. If this is you, then an empty saber might be your best choice. We provide you with all the hilt parts you need to make a complete installation, including our massive, custom copper heatsink, our custom switchplates that make installation a breeze, the corresponding switches, a 2.1mm recharge port, and all the necessary fasteners. You can order the two-switch version with sound holes and 12mm momentary illuminated LEDs (as featured on Prizm Saberz), or a single-switch version with a single 16mm latching switch (as featured on Spectrum Saberz).